Snow guards for metal roofs are the most effective snow retention systems on todays market. Metal snow guards help to keep snow and ice from 'avalanching' and causing damage to your property as well as being a hazard to vehicles and pedestrians. In Abbotsford, British Columbia, we install steel roof snow stoppers and ice guards.
FEATURES OF
When it comes to metal roof snow stops, they serve many purposes and help to protect your home. Roof snow guards provide many benefits such as:
ABBOTSFORD, BRITISH COLUMBIA
In British Columbia (Canada), the typical winter weather is large, heavy snowfalls and freezing rains. Once snow and ice begins to slide off your metal roof, it can cause major damage/harm to your roof, eavestroughs, landscaping, vehicles and pedestrians below. The purpose of roof snow guards and ice guards for metal roofs is to keep snow on your roof until it can safely melt and dissipate.
If your home is subjected to falling ice or snow avalanches, metal snow guards are the perfect snow retention solution for both residential and commercial roofs. At Ken’s Metal Roofing, we are full service snow stopper installers for metal roofs in Abbotsford BC. Each snow guard we use has been tested to withstand even the heaviest weights of ice and snow.
When installing snow stops on metal roofs, our installers precisely lay the guards in staggered rows over your roof. By staggering the metal snow guards, it distributes the weight of the snow evenly on the roof. Each guard is firmly attached directly to the roof surface.
Contact us today with all your metal roofing questions or call 778-771-2446 . We would be happy to hear from you.
Whether you live near Babich or Clearbrook Centre, we can make the commute to you.
Got a question? We're here to help!
When it comes to snow guards for metal roofs, there are three main types (snow guards, fence-style and bar-style snow guards). The type of snow guard your roof needs depends on a number of factors. All snow guards will prevent snow and ice from sliding off your roof, but certain ones work better for different slopes and roof materials. Let's take a look at each style below.
When people think of “snow guards”, these snow guards are what comes to mind for most individuals. They are separate units that are attached to the roof in a staggered or straight pattern, usually adhered to the flat part of the roofing panels but can sometimes be clamped to the seams. To keep them in place, they can be adhered with liquid adhesive, tape or screws. Snow guards are suitable for use on standing seam metal roofs, through fastened metal panel roofs, and most metal shingles.
Snow guards can be referred to by many different names including snow cleats, snow birds, snow pads and snow stops. While they come in a few different sizes, the most common sizes are small profile guards (less than 4 square inches) and large profile snow guards (more than 4 square inches). The most common snow guard materials sold in British Columbia are metal/steel and plastic.
Large profile snow guards have a pad face larger than 4 square inches and act like a snow movement barrier (more like a snow fence). The face of some large profile guards can be as large as 15 square inches.
This type of snow guard is typically installed in a straight or slightly staggered row 12" from the edge of a roof line. Additional rows might be needed for steeper pitches, longer eave-to-peak dimensions, and roofs with higher maximum snow loads.
Just like the name, bar-style snow guards are a continuous length of a rectangular metal "bar" that’s installed horizontally across the metal roof. The bar forms a strong barrier, which keeps the snow on the roof until it melts. With their streamlined modern appearance, bar-style snow guards look very clean and minimal against a roof. Depending on the pitch of the roof, the distance from the eave to the peak, and the snow load present, only one row is often needed. Some roofs however will require several rows to handle the load.
To attach these snow guards onto a roof, our installers can secure the brackets one of two ways: by either screwing them onto the decking or clamping them to the seams (only with a standing seam roof). The bar is then set in place and firmly attached to the brackets.
Fence-style snow guards are similar to bar-style guards, but instead of a single bar, these systems have two or more vertically oriented tubes (similar to a split rail fence). Fence-style snow guards are commonly used on custom homes. This style of ice guard also creates a tractional look which can be appealing to some homeowners.
Most fence-style snow guard systems are extremely durable. These are widely used in alpine areas where snow loads exceed 75 pounds per square foot and can be much higher.
© 2023 Ken's Metal Roofing. All Rights Reserved.